A simplified method of torque and flux control in the transient and field-weakening region based on the direct torque control (DTC) scheme is presented. The simplified method limits the magnitude of the stator voltage reference to the maximum instantaneous value allowable with space vector PWM. The simplified method was compared to an alternative technique which attempts to maintain dead beat control of one of the controlled variables during a transient in the other. The angle of the reference voltage is set equal to that calculated using the previously presented direct torque control method. It is the opinion of the authors that the simplified control scheme yields very satisfactory results, in comparison to the other control, and that the advantages gained by the reduced complexity outweigh the fact that dead-beat control is not available in transient and overmodulation conditions. The direct torque control scheme provides increased bus voltage utilization, and increased dynamic response due to the real-time, predictive nature of the control. This was verified through simulation and experimental results

Performance evaluation of a direct torque controlled drive in the continuous PWM-square wave transition region / Griva, Giovanni Battista; Habetler, T. G.; Profumo, Francesco; Pastorelli, MICHELE ANGELO. - STAMPA. - (1993), pp. 237-244. (Intervento presentato al convegno PESC '93, 24th Annual IEEE Power Electronics Specialists Conference tenutosi a Seattle (USA) nel 20-24 Jun 1993) [10.1109/PESC.1993.471951].

Performance evaluation of a direct torque controlled drive in the continuous PWM-square wave transition region

GRIVA, Giovanni Battista;PROFUMO, Francesco;PASTORELLI, MICHELE ANGELO
1993

Abstract

A simplified method of torque and flux control in the transient and field-weakening region based on the direct torque control (DTC) scheme is presented. The simplified method limits the magnitude of the stator voltage reference to the maximum instantaneous value allowable with space vector PWM. The simplified method was compared to an alternative technique which attempts to maintain dead beat control of one of the controlled variables during a transient in the other. The angle of the reference voltage is set equal to that calculated using the previously presented direct torque control method. It is the opinion of the authors that the simplified control scheme yields very satisfactory results, in comparison to the other control, and that the advantages gained by the reduced complexity outweigh the fact that dead-beat control is not available in transient and overmodulation conditions. The direct torque control scheme provides increased bus voltage utilization, and increased dynamic response due to the real-time, predictive nature of the control. This was verified through simulation and experimental results
1993
0780312430
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/1416493
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo