Archivio Istituzionale della RicercaThis paper deals with the realization of the four-pair terminal definition of impedance standards. A simple thought reliable system is described that allows an automatic compensation of the voltage at the low potential port of impedance standards to be obtained. Such a system, which employs a commercial DAQ board and an arbitrary signal generator, is controlled through a standard PC that implements the demodulation and the control algorithms. Preliminary tests have been performed in the frequency range of 50 Hz to 20 kHz with different kinds of impedance standards (resistive, inductive and capacitive), obtaining a residual voltage at the low potential port of less than 5 μV.
Automatic compensation system for impedance measurement / Carullo, Alessio; Parvis, Marco; Vallan, Alberto; Callegaro, L.. - STAMPA. - 1:(2002), pp. 517-521. (Intervento presentato al convegno 19th IEEE Instrumentation and Measurement Technology Conference tenutosi a Anchorage, Alaska, USA nel 21-23 May) [10.1109/IMTC.2002.1006896].
Automatic compensation system for impedance measurement
CARULLO, Alessio;PARVIS, Marco;VALLAN, Alberto;
2002
Abstract
This paper deals with the realization of the four-pair terminal definition of impedance standards. A simple thought reliable system is described that allows an automatic compensation of the voltage at the low potential port of impedance standards to be obtained. Such a system, which employs a commercial DAQ board and an arbitrary signal generator, is controlled through a standard PC that implements the demodulation and the control algorithms. Preliminary tests have been performed in the frequency range of 50 Hz to 20 kHz with different kinds of impedance standards (resistive, inductive and capacitive), obtaining a residual voltage at the low potential port of less than 5 μV.
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/11583/1841686
Attenzione
Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo