This article deals with the design, manufacturing, and testing of a propeller for a general aviation aircraft fuelled by hydrogen. The feasibility of the ENFICA-FC project depended on several key-enabling technologies. In order to minimize the power required from both the batteries and the fuel cell, a highly efficient electrical propulsion system was required, in which all the components would need to yield the highest possible efficiency. The choice of the propeller for this specific aircraft was more difficult, above all because the electric motor was limited as to the torque it could handle. In addition, the propeller would also have to provide the necessary airflow for the motor, electronics, and fuel cell cooling to ensure that the temperature did not exceed the limits imposed by the manufacturer. Although a designer may be aided by modern numerical design and analysis programmes to optimize propellers, structural and manufacturing constraints can influence the final choices. Finally, the calculated performance would always have to be validated with experimental tests. An optimal propeller has been designed and manufactured to be installed on the Rapid 200 FC aeroplane. Static tests on the manufactured two-blade propeller were performed by means of a static test facility. Specific tests have also been performed to check the efficiency of the propeller when installation effects (blockage and scrubbing drag effects) are included and to verify the real efficiency of the propulsion and cooling systems, with the propeller installed in the complete converted aircraft. A good agreement between the theoretical and experimental data was obtained.

Design and testing of a propeller for a two-seater aircraft powered by fuel cells / Romeo, Giulio; Cestino, Enrico; Pacino, Marco; Borello, Fabio; Correa, G.. - In: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART G, JOURNAL OF AEROSPACE ENGINEERING. - ISSN 0954-4100. - 226:7(2012), pp. 804-816. [10.1177/0954410011415476]

Design and testing of a propeller for a two-seater aircraft powered by fuel cells

ROMEO, Giulio;CESTINO, ENRICO;PACINO, MARCO;BORELLO, FABIO;
2012

Abstract

This article deals with the design, manufacturing, and testing of a propeller for a general aviation aircraft fuelled by hydrogen. The feasibility of the ENFICA-FC project depended on several key-enabling technologies. In order to minimize the power required from both the batteries and the fuel cell, a highly efficient electrical propulsion system was required, in which all the components would need to yield the highest possible efficiency. The choice of the propeller for this specific aircraft was more difficult, above all because the electric motor was limited as to the torque it could handle. In addition, the propeller would also have to provide the necessary airflow for the motor, electronics, and fuel cell cooling to ensure that the temperature did not exceed the limits imposed by the manufacturer. Although a designer may be aided by modern numerical design and analysis programmes to optimize propellers, structural and manufacturing constraints can influence the final choices. Finally, the calculated performance would always have to be validated with experimental tests. An optimal propeller has been designed and manufactured to be installed on the Rapid 200 FC aeroplane. Static tests on the manufactured two-blade propeller were performed by means of a static test facility. Specific tests have also been performed to check the efficiency of the propeller when installation effects (blockage and scrubbing drag effects) are included and to verify the real efficiency of the propulsion and cooling systems, with the propeller installed in the complete converted aircraft. A good agreement between the theoretical and experimental data was obtained.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2427996
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo