Thermal cyclic tests in air were performed for Crofer22APU/glass-ceramic/Anode-Supported-Electrolyte (ASE) joined samples for a total period of 3000 hours. Different cooling rates from the SOFC operating temperature of 800°C to room temperature were carried out. Large and elongated voids were observed to develop just below the Cr2O3/Cr-Mn spinel layer of the Crofer22APU. Diffusion of Al to the areas just below the protective oxide layer led to formation of Al2O3 on the surface of the voids. The emergence of CaAl2Si2O8 as a new phase in the glass-ceramic was attributed to the diffusion of Ca away from the interfacial areas thus decreasing the proportion of Ca to Al and Si. The glass-ceramic sealant maintained good adherence with the Crofer22APU and the ASE without presence of any crack even after 3000hrs of exposure.

Thermal cycling of Crofer22APU-sealant-anode supported electrolyte joined structures for planar SOFCs up to 3000 h / Smeacetto, Federico; Chrysanthou, A.; Moskalewicz, T.; Salvo, Milena. - In: MATERIALS LETTERS. - ISSN 0167-577X. - 111:(2013), pp. 143-146. [10.1016/j.matlet.2013.08.025i]

Thermal cycling of Crofer22APU-sealant-anode supported electrolyte joined structures for planar SOFCs up to 3000 h

SMEACETTO, FEDERICO;SALVO, Milena
2013

Abstract

Thermal cyclic tests in air were performed for Crofer22APU/glass-ceramic/Anode-Supported-Electrolyte (ASE) joined samples for a total period of 3000 hours. Different cooling rates from the SOFC operating temperature of 800°C to room temperature were carried out. Large and elongated voids were observed to develop just below the Cr2O3/Cr-Mn spinel layer of the Crofer22APU. Diffusion of Al to the areas just below the protective oxide layer led to formation of Al2O3 on the surface of the voids. The emergence of CaAl2Si2O8 as a new phase in the glass-ceramic was attributed to the diffusion of Ca away from the interfacial areas thus decreasing the proportion of Ca to Al and Si. The glass-ceramic sealant maintained good adherence with the Crofer22APU and the ASE without presence of any crack even after 3000hrs of exposure.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2513480
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo