In the design phase of a shallow tunnel, one of the relevant aspects to take into consideration is the stress release generated in the neighbourhood of the excavation. In fact, the material removal causes a variation of the initial state of stress and the stress release induces surface subsidence. In urban areas, surface settlements must be evaluated in order to properly perform risk analysis on buildings above the line, the so-called BRA, Building Risk Assessment. The three-dimensional modelling of the problem better simulates the digging conditions and the progress of the excavation face, but the analyses are time-consuming. On the other hand, the two-dimensional modelling requires a moderate computational time, but a method to simulate the ground stress release, generated during the excavation phases, has to be chosen. In the following study, the surface subsidence induced by a traditional excavation is evaluated by using a finite-difference numerical simulation with FLAC3D. A parametric analysis to highlight the influence of different parameters on the maximum surface subsidence and on stress release is performed. The analysed parameters are the H/D ratio (overburden divided by tunnel diameter), the K0 coefficient and the unsupported length. Subsequently, a two-dimensional FEM modelling is performed with the software PLAXIS, to compare the 3D and 2D results. The aim is to quantify the improvement of a 3D numerical analysis and an advanced constitutive model (hardening soil model) on the estimation of subsidence, indicating a proper procedure to be followed in the design phase.

Numerical analysis of settlements due to conventional tunnelling / Feneziani, G.; Floria, V.; Barbero, Monica. - ELETTRONICO. - (2015). (Intervento presentato al convegno ITA-AITES World Tunnel Congress 2015 tenutosi a Dubrovnik (Croatia) nel May 22-28, 2015).

Numerical analysis of settlements due to conventional tunnelling

BARBERO, Monica
2015

Abstract

In the design phase of a shallow tunnel, one of the relevant aspects to take into consideration is the stress release generated in the neighbourhood of the excavation. In fact, the material removal causes a variation of the initial state of stress and the stress release induces surface subsidence. In urban areas, surface settlements must be evaluated in order to properly perform risk analysis on buildings above the line, the so-called BRA, Building Risk Assessment. The three-dimensional modelling of the problem better simulates the digging conditions and the progress of the excavation face, but the analyses are time-consuming. On the other hand, the two-dimensional modelling requires a moderate computational time, but a method to simulate the ground stress release, generated during the excavation phases, has to be chosen. In the following study, the surface subsidence induced by a traditional excavation is evaluated by using a finite-difference numerical simulation with FLAC3D. A parametric analysis to highlight the influence of different parameters on the maximum surface subsidence and on stress release is performed. The analysed parameters are the H/D ratio (overburden divided by tunnel diameter), the K0 coefficient and the unsupported length. Subsequently, a two-dimensional FEM modelling is performed with the software PLAXIS, to compare the 3D and 2D results. The aim is to quantify the improvement of a 3D numerical analysis and an advanced constitutive model (hardening soil model) on the estimation of subsidence, indicating a proper procedure to be followed in the design phase.
2015
9789535572855
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2609356
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo