For several years the application of composite materials with continuous fiber were limited to those with thermosetting matrix. Indeed, in recent years, there is a growing interest in composites with thermoplastic matrix thanks to the considerable advantages in terms of recyclability, and the reduction in weight and in production costs. In the automotive sector, increasingly stringent requirements for reduced emissions of CO2, the maximum return on capital investment and the increase in plastic recycling and reuse, are some of the most important problems that directly influence the development of new materials. The thermoplastic composites appear to be the right alternative to the materials currently used for vehicles. They can replace not only the not structural parts (such as the interiors), but also the structural components located in areas potentially subject to impacts. This paper presents the results of an experimental campaign made on a full thermoplastic composite, where both the reinforcement and the matrix are made in thermoplastic. The target is to know the mechanical properties in order to design an energy absorber with this new material. Initially, tensile, compression, bending and shear tests were made according to standards to obtain the mechanical characteristics. Subsequently, static and dynamic tests on thin-walled cylindrical tubes subjected to axial load were made in order to assess the energy absorption capacity varying the project parameters. The data were recorded and analyzed in terms of load–displacement curves, specific energy absorption (SEA), crush force efficiency (CFE), stroke efficiency (SE) and crushing stress. Comparing the new material to a common thermosets composite, different values of SEA are evident; fully thermoplastic composites are 3/4 times lower in energy absorption capacity. Nevertheless, taking into account the other favorable characteristic (such as full recyclability and shorter processing times) this fully thermoplastic material continues to be interesting for lightweight design. From the point of view of the energy absorption its spring back behavior offers some advantages respect to thermoset and conventional materials that tend to shatter and to buckle in the event of impact, respectively.

Experimental evaluation of a fully recyclable thermoplastic composite / S., Boria; Scattina, Alessandro; Belingardi, Giovanni. - In: COMPOSITE STRUCTURES. - ISSN 0263-8223. - STAMPA. - 140:(2016), pp. 21-35. [10.1016/j.compstruct.2015.12.049]

Experimental evaluation of a fully recyclable thermoplastic composite

SCATTINA, ALESSANDRO;BELINGARDI, Giovanni
2016

Abstract

For several years the application of composite materials with continuous fiber were limited to those with thermosetting matrix. Indeed, in recent years, there is a growing interest in composites with thermoplastic matrix thanks to the considerable advantages in terms of recyclability, and the reduction in weight and in production costs. In the automotive sector, increasingly stringent requirements for reduced emissions of CO2, the maximum return on capital investment and the increase in plastic recycling and reuse, are some of the most important problems that directly influence the development of new materials. The thermoplastic composites appear to be the right alternative to the materials currently used for vehicles. They can replace not only the not structural parts (such as the interiors), but also the structural components located in areas potentially subject to impacts. This paper presents the results of an experimental campaign made on a full thermoplastic composite, where both the reinforcement and the matrix are made in thermoplastic. The target is to know the mechanical properties in order to design an energy absorber with this new material. Initially, tensile, compression, bending and shear tests were made according to standards to obtain the mechanical characteristics. Subsequently, static and dynamic tests on thin-walled cylindrical tubes subjected to axial load were made in order to assess the energy absorption capacity varying the project parameters. The data were recorded and analyzed in terms of load–displacement curves, specific energy absorption (SEA), crush force efficiency (CFE), stroke efficiency (SE) and crushing stress. Comparing the new material to a common thermosets composite, different values of SEA are evident; fully thermoplastic composites are 3/4 times lower in energy absorption capacity. Nevertheless, taking into account the other favorable characteristic (such as full recyclability and shorter processing times) this fully thermoplastic material continues to be interesting for lightweight design. From the point of view of the energy absorption its spring back behavior offers some advantages respect to thermoset and conventional materials that tend to shatter and to buckle in the event of impact, respectively.
File in questo prodotto:
File Dimensione Formato  
Experimental evaluation of a fully recyclable thermoplastic composite_POSTPRINT_A.pdf

accesso aperto

Tipologia: 2. Post-print / Author's Accepted Manuscript
Licenza: Creative commons
Dimensione 4.3 MB
Formato Adobe PDF
4.3 MB Adobe PDF Visualizza/Apri
Experimental evaluation of a fully recyclable thermoplastic composite.pdf

non disponibili

Tipologia: 2a Post-print versione editoriale / Version of Record
Licenza: Non Pubblico - Accesso privato/ristretto
Dimensione 5.5 MB
Formato Adobe PDF
5.5 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2627703