This paper presents the Design of Experiments (DOE) based parametric design optimization of the Symmetric Toggle RF-MEMS Switch (STS) for minimizing the actuation voltage considering the fabrication process uncertainties and thermally induced residual stress. Initially, three-dimensional (3D) non-linear Finite Element Method (FEM) models are developed and the formation of residual stress during the plasma etching step of the microfabrication process is explained using the Bauschinger effect. The pull-in voltage values and the switch profiles obtained after the thermal loading–unloading cycle in the FEM models are compared with the experimental values and optical profile measurements which showed a close agreement. A DOE based Dual Response Surface Methodology (DRSM) is implemented to identify the significant design parameters affecting the STS switch pull-in voltage in the presence of thermally induced residual stress. Two separate response surface empirical models are developed; one for the mean pull-in voltage and other for variation in the pull-in voltage due to microfabrication process tolerances. The developed response surface models are optimized simultaneously using the desirability function approach. The optimal levels of the design parameters that result in minimum pull-in voltage with increased insensitivity to process uncertainties are obtained using the direct search algorithm.

Design optimization of RF-MEMS switch considering thermally induced residual stress and process uncertainties / Saleem, MUHAMMAD MUBASHER; Soma', Aurelio. - In: MICROELECTRONICS RELIABILITY. - ISSN 0026-2714. - STAMPA. - 55:11(2015), pp. 2284-2298. [10.1016/j.microrel.2015.07.026]

Design optimization of RF-MEMS switch considering thermally induced residual stress and process uncertainties

SALEEM, MUHAMMAD MUBASHER;SOMA', AURELIO
2015

Abstract

This paper presents the Design of Experiments (DOE) based parametric design optimization of the Symmetric Toggle RF-MEMS Switch (STS) for minimizing the actuation voltage considering the fabrication process uncertainties and thermally induced residual stress. Initially, three-dimensional (3D) non-linear Finite Element Method (FEM) models are developed and the formation of residual stress during the plasma etching step of the microfabrication process is explained using the Bauschinger effect. The pull-in voltage values and the switch profiles obtained after the thermal loading–unloading cycle in the FEM models are compared with the experimental values and optical profile measurements which showed a close agreement. A DOE based Dual Response Surface Methodology (DRSM) is implemented to identify the significant design parameters affecting the STS switch pull-in voltage in the presence of thermally induced residual stress. Two separate response surface empirical models are developed; one for the mean pull-in voltage and other for variation in the pull-in voltage due to microfabrication process tolerances. The developed response surface models are optimized simultaneously using the desirability function approach. The optimal levels of the design parameters that result in minimum pull-in voltage with increased insensitivity to process uncertainties are obtained using the direct search algorithm.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2673202
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo