Pubblicazioni dell'autore: Matteo Pavese [Rubrica]

Livello precedente
Esporta come [feed] Atom [feed] DataCiteXML [feed] RSS 1.0 [feed] RSS 2.0
Vai a: 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2003 | 2002
Numero di pubblicazioni : 162.

2017

Articolo di rivista Conrado, Federico; Pavese, Matteo (2017)
A Continuous 3D-Graphene Network to Overcome Threshold Issues and Contact Resistance in Thermally Conductive Graphene Nanocomposites. In: JOURNAL OF NANOMATERIALS, vol. 2017, pp. 1-11. - ISSN 1687-4110
Web of Science: 0 - Scopus: 0

Articolo di rivista Saboori, Abdollah; Pavese, Matteo; Badini, Claudio Francesco; Fino, Paolo (2017)
Development of Al- and Cu-based nanocomposites reinforced by graphene nanoplatelets: Fabrication and characterization. In: FRONTIERS OF MATERIALS SCIENCE, pp. 1-11. - ISSN 2095-0268
Web of Science: 0 - Scopus: 0

Articolo di rivista Saboori, Abdollah; Pavese, Matteo; Badini, Claudio; Fino, Paolo (2017)
Effect of Sample Preparation on the Microstructural Evaluation of Al-GNPs Nanocomposites. In: METALLOGRAPHY, MICROSTRUCTURE, AND ANALYSIS. - ISSN 2192-9262

Articolo di rivista Saboori, Abdollah; Padovano, Elisa; Pavese, Matteo; Dieringa, Hajo; Badini, Claudio (2017)
Effect of Solution Treatment on Precipitation Behaviors, Age Hardening Response and Creep Properties of Elektron21 Alloy Reinforced by AlN Nanoparticles. In: MATERIALS, vol. 10 n. 12, 1380-. - ISSN 1996-1944
[img]
Preview

Articolo di rivista Aversa, Alberta; Lorusso, Massimo; Trevisan, Francesco; Ambrosio, Elisa Paola; Calignano, Flaviana; Manfredi, Diego Giovanni; Biamino, Sara; Fino, Paolo; Lombardi, Mariangela; Pavese, Matteo (2017)
Effect of process and post-process conditions on the mechanical properties of an A357 alloy produced via laser powder bed fusion. In: METALS, vol. 7 n. 2, 68-. - ISSN 2075-4701 [Disponibilità ristretta]
Web of Science: 1 - Scopus: 1
[img]

Articolo di rivista Ambrosio, Elisa Paola; Abdul Karim, Muhammad Ramzan; Pavese, Matteo; Biamino, Sara; Badini, Claudio Francesco; Fino, Paolo (2017)
Feasibility of Electrochemical Deposition of Nickel/Silicon Carbide Fibers Composites over Nickel Superalloys. In: METALLURGICAL AND MATERIALS TRANSACTIONS. A, PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 48 n. 5, pp. 2504-2510. - ISSN 1073-5623
Web of Science: 0 - Scopus: 0

Articolo di rivista Saboori, Abdollah; Dadkhah, Mehran; Pavese, Matteo; Manfredi, Diego; Biamino, Sara; Fino, Paolo (2017)
Hot deformation behavior of Zr-1%Nb Alloy: Flow Curve Analysis and Microstructure Observations. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. - ISSN 0921-5093
Web of Science: 0 - Scopus: 0

Articolo di rivista Saboori, Abdollah; Novara, Chiara; Pavese, Matteo; Badini, Claudio Francesco; Giorgis, Fabrizio; Fino, Paolo (2017)
An Investigation on the Sinterability and the Compaction Behavior of Aluminum/Graphene Nanoplatelets (GNPs) Prepared by Powder Metallurgy. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, pp. 1-7. - ISSN 1059-9495 [Disponibilità ristretta]
Web of Science: 1 - Scopus: 1
[img]

Articolo di rivista Saboori, Abdollah; Pavese, Matteo; Badini, Claudio Francesco; Fino, Paolo (2017)
MICROSTRUCTURE AND THERMAL CONDUCTIVITY OF AL-GRAPHENE COMPOSITES FABRICATED BY POWDER METALLURGY AND HOT ROLLING TECHNIQUES. In: ACTA METALLURGICA SINICA. - ISSN 1006-7191
Web of Science: 0 - Scopus: 0

Articolo di rivista Aversa, Alberta; Marchese, Giulio; Lorusso, Massimo; Calignano, Flaviana; Biamino, Sara; Ambrosio, Elisa P.; Manfredi, Diego; Fino, Paolo; Lombardi, Mariangela; Pavese, Matteo (2017)
Microstructural and Mechanical Characterization of Aluminum Matrix Composites Produced by Laser Powder Bed Fusion. In: ADVANCED ENGINEERING MATERIALS, 1700180-. - ISSN 1438-1656 [Disponibilità ristretta]
Scopus: 0
[img]

Articolo in atti di convegno Lavagna, Luca; Massella, Daniele; Maria Fiorella Pantano, ; Federico, Bosia; Nicola, Pugno; Pavese, Matteo (2017)
Multiscale composites based on carbon fibers and carbon nanotubes. In: Merck Young Chemists Symposium (MYCS 2017), Milano Marittima, 13-15 November 2017. p. 161

Articolo di rivista Saboori, Abdollah; Moheimani, Seyed; Pavese, Matteo; Badini, Claudio; Fino, Paolo (2017)
New Nanocomposite Materials with Improved Mechanical Strength and Tailored Coefficient of Thermal Expansion for Electro-Packaging Applications. In: METALS, vol. 7 n. 12, 536-. - ISSN 2075-4701
[img]
Preview

Articolo di rivista Saboori, Abdollah; Pavese, Matteo; Badini, Claudio Francesco; Fino, Paolo (2017)
A Novel Approach to Enhance the Mechanical Strength and Electrical and Thermal Conductivity of Cu-GNP Nanocomposites. In: METALLURGICAL AND MATERIALS TRANSACTIONS. A, PHYSICAL METALLURGY AND MATERIALS SCIENCE. - ISSN 1073-5623

Articolo di rivista Saboori Abdollah; Pavese Matteo; Badini Claudio; Fino Paolo (2017)
A Novel Cu-GNPs Nanocomposite with Improved Thermal and Mechanical Properties. In: ACTA METALLURGICA SINICA. - ISSN 1006-7191

Articolo di rivista Lavagna, Luca; Massella, Daniele; Pavese, Matteo (2017)
Preparation of hierarchical material by chemical grafting of carbon nanotubes onto carbon fibers. In: DIAMOND AND RELATED MATERIALS, vol. 80, pp. 118-124. - ISSN 0925-9635
Scopus: 0

Articolo di rivista Aversa, Alberta; Lorusso, Massimo; Cattano, Giulio; Manfredi, Diego Giovanni; Calignano, Flaviana; Ambrosio, Elisa Paola; Biamino, Sara; Fino, Paolo; Lombardi, Mariangela; Pavese, Matteo (2017)
A study of the microstructure and the mechanical properties of an AlSiNi alloy produced via selective laser melting. In: JOURNAL OF ALLOYS AND COMPOUNDS, vol. 695, pp. 1470-1478. - ISSN 0925-8388
Web of Science: 1 - Scopus: 1

2016

Articolo in atti di convegno Lavagna, Luca; Simone, Musso; Pavese, Matteo (2016)
Controlled oxidation of MWCNTs at low temperature. In: Merck Young Chemists Symposium (MYCS 2016), Rimini, 25-27 October 2016. p. 46

Articolo di rivista Cabrini, M.; Lorenzi, S.; Pastore, T.; Pellegrini, S; Pavese, M.; Fino, P.; Ambrosio, E.P.; Calignano, F.; Manfredi, D. (2016)
Corrosion resistance of direct metal laser sintering AlSiMg alloy. In: SURFACE AND INTERFACE ANALYSIS, vol. 48 n. 8, pp. 818-826. - ISSN 0142-2421
Web of Science: 5 - Scopus: 5

Articolo di rivista Cabrini, M; Lorenzi, S.; Pastore, T.; Pellegrini, S.; Ambrosio, E.P.; Calignano, F.; Manfredi, D.; Pavese, M.; Fino, P. (2016)
Effect of heat treatment on corrosion resistance of DMLS AlSi10Mg alloy. In: ELECTROCHIMICA ACTA, vol. 206, pp. 346-355. - ISSN 0013-4686
Web of Science: 5 - Scopus: 6

Articolo di rivista Tortello, Mauro; Colonna, Samuele; Bernal Ortega, Maria Del Mar; Gomez, Julio; Pavese, Matteo; Novara, Chiara; Giorgis, Fabrizio; Maggio, Mauro; Guerra, Gaetano; Saracco, Guido; Gonnelli, Renato; Fina, Alberto (2016)
Effect of thermal annealing on the heat transfer properties of reduced graphite oxide flakes: A nanoscale characterization via scanning thermal microscopy. In: CARBON, vol. 109, pp. 390-401. - ISSN 0008-6223
Web of Science: 11 - Scopus: 11

Articolo di rivista Baudana, Giorgio; Biamino, Sara; Klöden, Burghardt; Kirchner, Alexander; Weißgärber, Thomas; Kieback, Bernd; Pavese, Matteo; Ugues, Daniele; Fino, Paolo; Badini, Claudio (2016)
Electron Beam Melting of Ti-48Al-2Nb-0.7Cr-0.3Si: Feasibility investigation. In: INTERMETALLICS, vol. 73, pp. 43-49. - ISSN 0966-9795
Web of Science: 7 - Scopus: 6

Articolo di rivista Pereira Dos Santos Tonello, Karolina; Padovano, Elisa; Badini, Claudio; Biamino, Sara; Pavese, Matteo; Fino, Paolo (2016)
Fabrication and characterization of laminated SiC composites reinforced with graphene nanoplatelets. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol. 659, pp. 158-164. - ISSN 0921-5093
Web of Science: 6 - Scopus: 7

Articolo in atti di convegno Fina, Alberto; Colonna, Samuele; Monticelli, Orietta; Tortello, Mauro; Gonnelli, Renato; Gomez, Julio; Pavese, Matteo; Giorgis, Fabrizio; Saracco, Guido (2016)
Graphene nanoplatelets for thermally conductive polymer nanocomposites via melt reactive extrusion. In: Graphene Conference, Genova (Italia).

Articolo in atti di convegno Fina, Alberto; Colonna, Samuele; Monticelli, Orietta; Tortello, Mauro; Gonnelli, Renato; Gomez, Julio; Pavese, Matteo; Giorgis, Fabrizio; Saracco, Guido (2016)
Graphene nanoplatelets for thermally conductive polymer nanocomposites via melt reactive extrusion. In: European Graphene Foruom 2016, Parigi, 1-3 Giugno 2016. p. 282

Articolo in atti di convegno Marchese, Giulio; Lorusso, Massimo; Calignano, Flaviana; Ambrosio, Elisa Paola; Manfredi, Diego; Pavese, Matteo; Biamino, Sara; Ugues, Daniele; Fino, Paolo; (2016)
Inconel 625 by Direct Metal Laser Sintering: Effects of the Process Parameters and Heat Treatments on Microstructure and Hardness. In: Superalloys 2016: Proceedings of the 13th Intenational Symposium of Superalloys, Pennsylvania (USA), 11-15 Settembre 2016. pp. 1013-1020
Scopus: 0

Articolo in atti di convegno Saboori, A.; Pietroluongo, M.; Pavese, M.; Badini, C.; Fino, P. (2016)
Influence of Graphene nanoplatelets (GNPs) on compressibility and sinterability of Al matrix nanocomposites prepared by powder metallurgy. In: WordPM2016, Congress and exhebition, 4 days, 9-13 October 2016.

Articolo di rivista Marchese, Giulio; Bassini, Emilio; Calandri, Michele; Ambrosio, Elisa Paola; Calignano, Flaviana; Lorusso, Massimo; Manfredi, Diego; Pavese, Matteo; Biamino, Sara; Fino, Paolo (2016)
Microstructural investigation of as-fabricated and heat-treated Inconel 625 and Inconel 718 fabricated by direct metal laser sintering: contribution of Politecnico di Torino and Istituto Italiano di Tecnologia (IIT) di Torino. In: METAL POWDER REPORT, vol. 71 n. 4, pp. 273-278. - ISSN 0026-0657
Scopus: 0

Articolo di rivista Katsarou, 105.L.; Mounib, M.; Lefebvre, W.; Vorozhtsov, S.; Pavese, M.; Badini, C.; Molina-Aldareguia, J.M.; Cepeda Jimenez, C.; Pérez Prado, M.T.; Dieringa, H. (2016)
Microstructure, mechanical properties and creep of magnesium alloy Elektron21 reinforced with AlN nanoparticles by ultrasound-assisted. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol. 659, pp. 84-92. - ISSN 0921-5093
Web of Science: 4 - Scopus: 6

Articolo in atti di convegno Tortello, Mauro; Colonna, Samuele; Gomez, Julio; Pasternak, Iwona; Strupinski, Włodzimierz; Pavese, Matteo; Giorgis, Fabrizio; Saracco, Guido; Gonnelli, Renato; Fina, Alberto (2016)
Nanoscale characterization of the thermal conductivity of supported graphite nanoplates, graphene and few-layer graphene. In: Graphene Week, Varsavia. p. 117

Articolo in atti di convegno Aversa, A; Lorusso, M; Manfredi, D; Calignano, F; Fino, P; Pavese, M (2016)
SELECTIVE LASER MELTING OF ALUMINIUM MATRIX NANOCOMPOSITES. In: Forum Nazionale dei Giovani Ricercatori di Scienza e Tecnologia dei Materiali (Materiali 2016), Ischia, giugno 2016.

Articolo di rivista Saboori, A.; Pavese, M.; Badini, C.; Eivani, A.R. (2016)
Studying the age hardening kinetics of A357 aluminum alloys through the Johnson-Mehl-Avrami theory. In: METAL POWDER REPORT. - ISSN 0026-0657
Scopus: 1

Articolo di rivista Baudana, Giorgio; Biamino, Sara; Ugues, Daniele; Lombardi, Mariangela; Fino, Paolo; Pavese, Matteo; Badini, Claudio (2016)
Titanium aluminides for aerospace and automotive applications processed by Electron Beam Melting: Contribution of Politecnico di Torino. In: METAL POWDER REPORT, vol. 71 n. 3, pp. 193-199. - ISSN 0026-0657
Scopus: 2

Articolo di rivista Lorusso, Massimo; Aversa, Alberta; Manfredi, Diego; Calignano, Flaviana; Ambrosio, Elisa Paola; Ugues, Daniele; Pavese, Matteo (2016)
Tribological Behavior of Aluminum Alloy AlSi10Mg-TiB2 Composites Produced by Direct Metal Laser Sintering (DMLS). In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, pp. 1-9. - ISSN 1059-9495
Web of Science: 2 - Scopus: 2

2015

Articolo in atti di convegno Lavagna, L.; Pavese, M.; Ledda, L.; Musso, S. (2015)
Advanced cement-based nanocomposites. In: Euromat 2015, Varsavia (PL), Settembre 2015.

Articolo in atti di convegno Conrado, Federico; Colonna, Samuele; Lavagna, Luca; Cerruti, Marta; Sangermano, Marco; Pavese, Matteo (2015)
Composites with a graphene continuous network as a strategy to improve the thermal conductivity of polymers. In: EUROMAT 2015, warsaw, poland, 20-24 settembre 2015.
[img]
Preview

Articolo in atti di convegno Saboori, A.; Badini, C.; Pavese, M. (2015)
Effect of Graphene Nanoplatelets (GNPs) on Properties of Pure Copper. In: GraphITA 2015, Bologna, Italy, 14-18 September 2015.

Articolo in atti di convegno Lavagna, L.; Khushnood, R.A.; Restuccia, L.; Biren, T.; Tulliani, J.M.; Ferro, G.A.; Pavese, M. (2015)
Effect of the Oxygen Content of Graphene on the Mechanical Properties of Cement-Based Composites. In: GraphITA, Bologna (I), 14/09/2015 - 18/09/2015.

Articolo in atti di convegno Colonna, Samuele; Fina, Alberto; Han, Zhidong; Tortello, Mauro; Gonnelli, Renato; Pavese, Matteo; Giorgis, Fabrizio; Virga, Alessandro; Saracco, Guido (2015)
GRAPHENE NANOPLATELETS FOR THERMALLY CONDUCTIVE POLYMER NANOCOMPOSITES. In: Eurofillers Polymer Blends 2015, Montpellier (Fr), 26/04/2015 - 30/04/2015.

Articolo in atti di convegno Marchese, Giulio; Biamino, Sara; Pavese, Matteo; Ugues, Daniele; Lombardi, Mariangela; Vallillo, Gianfranco; Fino, Paolo (2015)
Heat treatment optimization of Hastelloy X superalloy produced by Direct Metal Laser Sintering. In: Euro PM2015, Reims (FR), 4-7 Ottobre 2015.
Scopus: 0

Articolo di rivista Terner, M.; Biamino, S.; Baudana, G.; Penna, A.; Fino, P.; Pavese, M.; Ugues, D.; Badini, C. (2015)
Initial Oxidation Behavior in Air of TiAl-2Nb and TiAl-8Nb Alloys Produced by Electron Beam Melting. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, vol. 24 n. 10, pp. 3982-3988. - ISSN 1059-9495
Web of Science: 3 - Scopus: 5

Articolo in atti di convegno A, Aversa; Pavese, M.; Manfredi, D.; Calignano, F.; Ambrosio, E.; Biamino, S. (2015)
Microstructural and mechanical characterization of AlSi10Mg - TiB2 composites produced by direct metal laser sintering technique. In: EuroPM2015, Reims, Ottobre 2015.
Scopus: 0

Articolo in atti di convegno Saboori, A.; Pavese, M.; Fino, P.; Badini, C.; Mourghorban, P. (2015)
A Novel Technique to Homogeneously Disperse Graphene Nanoplateletes (GNPs) in Aluminium Matrix. In: Euro PM2015 Congress and Exhibition, Reims Congress Centre, Reims, France, 4 - 7 October 2015.
Scopus: 0

Articolo di rivista E. Padovano ;C. Badini; E. Celasco; S. Biamino; M. Pavese;P. Fino (2015)
Oxidation behavior of ZrB2/SiC laminates: Effect of composition on microstructure and mechanical strength. In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, vol. 35 n. 6, pp. 1699-1714. - ISSN 0955-2219
Web of Science: 8 - Scopus: 7

Articolo di rivista Giorcelli, M; Pavese, M.; Shahzad, M.I.; Tagliaferro, A. (2015)
Silicon carbide hollow cylinders using carbon nanotubes structures as template. In: MATERIALS LETTERS, vol. 151, pp. 12-15. - ISSN 0167-577X
Web of Science: 4 - Scopus: 4

Articolo di rivista Yang, W.S; Biamino, S.; Padovano, E.; Pavese, M.; Fino, P.; Badini, C. (2015)
Thermophysical Properties of Short Carbon Fiber/SiC Multilayer Composites Prepared by Tape Casting and Pressureless Sintering. In: INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, vol. 12 n. 3, pp. 510-521. - ISSN 1546-542X
Web of Science: 1 - Scopus: 2

Articolo in atti di convegno Baudana, Giorgio; Biamino, Sara; Fino, Paolo; Pavese, Matteo; Badini, Claudio (2015)
γ-TiAl alloys produced by Electron Beam Melting for aerospace and automotive applications. In: X Convegno INSTM, Favignana (IT), 28 Giugno - 1 Luglio.

Articolo in atti di convegno Conrado, Federico; Pavese, Matteo; Cerruti, Marta (2015)
A continuous 3D-graphene network to overcome threshold issues and contact resistance in thermally conductive graphene nanocomposites. In: GraphITA 2015, Bologna, 14-18 Settembre 2015.

2014

Capitolo di libro Manfredi D.; Calignano F.; Krishnan M.; Canali R.; Ambrosio E.P.; Biamino S.; Ugues D.; Pavese M.; Fino P. (2014)
Additive Manufacturing of Al Alloys and Aluminium Matrix Composites (AMCs). In: Light Metal Alloys Applications / Waldemar A. Monteiro. InTech, Rijeka, pp. 1-32. ISBN 9789535115885

Articolo in atti di convegno D. Manfredi; R. Canali; M. Krishnan; E.P. Ambrosio; F. Calignano; M. Pavese; L. Miranti; S. Belardinelli; S. Biamino; P. Fino (2014)
Aluminium matrix composites (AMCs) by DMLS. In: 6th International Conference on Advanced Research in Virtual and Physical Prototyping, VR@P 2013, Leira, 1 October 2013 through 5 October 2013. pp. 249-253
Web of Science: 0 - Scopus: 0

Articolo in atti di convegno F. Calignano; D. Manfredi; E.P. Ambrosio; S. Biamino; M. Pavese; P. Fino (2014)
Direct fabrication of joints based on direct metal laser sintering in aluminum and titanium alloys. In: 24th CIRP Design Conference: Mass Customization and Personalization, Pirelli Lombardy Region PalaceMilano; Italy, 14 April 2014 through 16 April 2014. pp. 129-132
Scopus: 5

Articolo di rivista Sillekens, W.H. ; Jarvis, D.J.; Vorozhtsov, A.; Bojarevics, V.; Badini, C.F.; Pavese, M.; Terzi, S.; Salvo, L.; Katsarou, L.; Dieringa, H. (2014)
The ExoMet Project: EU/ESA Research on High-Performance Light-Metal Alloys and Nanocomposites. In: METALLURGICAL AND MATERIALS TRANSACTIONS. A, PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 45 n. 8, pp. 3349-3361. - ISSN 1073-5623 [Disponibilità ristretta]
Web of Science: 15 - Scopus: 17
[img]

Brevetto Chen, Xiang; Pavese, Matteo; Badini, Claudio Francesco; Fino, Paolo; Biamino, Sara; Wenshu, Yang (2014)
Method for producing aluminum matrix composites through pressureless infiltration. WO2014207776 A1.

Brevetto Musso, Simone; Allouche, Mickael; Pavese, Matteo (2014)
Piezoresistive cement nanocomposites. WO2015077524 A1.

Articolo di rivista Maher Mounib;Matteo Pavese;Claudio Badini;Williams Lefebvre;Hajo Dieringa (2014)
Reactivity and Microstructure of Al2O3-Reinforced Magnesium-Matrix Composites. In: ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, vol. 2014, pp. 1-6. - ISSN 1687-8434
Web of Science: 2 - Scopus: 7

2013

Articolo in atti di convegno Azhar Hussain, Matteo Pavese, Luca Settineri, Paolo Fino, Sara Biamino, Claudio Badini, Muhammad Ramzan Abdul Karim, Elisa Padovano (2013)
Aluminosilicates Assisted Pressureless Sintering of Sialon Ceramics. In: International Conference on Chemical, Agricultural and Medical Sciences, Kuala Lumpur, Malaysia, 29-30 December, 2013.

Articolo di rivista D. Manfredi; F. Calignano; E.P. Ambrosio; M. Krishnan; R. Canali; S. Biamino; M. Pavese; E. Atzeni; L. Iuliano; P. Fino; C. Badini (2013)
Direct Metal Laser Sintering: an additive manufacturing technology ready to produce lightweight structural parts for robotic applications. In: LA METALLURGIA ITALIANA, vol. 105 (10), pp. 15-25. - ISSN 0026-0843
Web of Science: 12 - Scopus: 22

Articolo di rivista W.S. Yang; S. Biamino; E. Padovano; M. Pavese; X. Chen; P. Fino; C. Badini (2013)
Microstructure and mechanical properties of milled fibre/SiC multilayer composites prepared by tape casting and pressureless sintering. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol. 588, pp. 103-110. - ISSN 0921-5093 [Disponibilità ristretta]
Web of Science: 3 - Scopus: 1
[img]

Articolo di rivista M. Terner;S. Biamino;D. Ugues;S. Sabbadini;P. Fino;M. Pavese;C. Badini (2013)
Phase transitions assessment on γ-TiAl by Thermo Mechanical Analysis. In: INTERMETALLICS, vol. 37, pp. 7-10. - ISSN 0966-9795
Web of Science: 4 - Scopus: 5

Articolo in atti di convegno Milanese D., Chiesa M., Pavese M., Taccheo S., Gebavi H., Robin T., Lablonde L., Mattsson K., Mechin D., Monteville A., Virga A., Giorgis F. (2013)
Photodarkening in Yb-doped fibres for high power lasers: investigation of structural changes within the EU project "LIFT". In: The 23rd International Congress on Glass, Prague, Czech Republic, 1-5 July 2013. p. 145 [Disponibilità ristretta]
[img]

Articolo di rivista Padovano, E.; Badini, C.; Biamino, S.; Pavese, M.; Yang, W.S.; Fino, P. (2013)
Pressureless sintering of ZrB2-SiC composite laminates using boron and carbon as sintering aids. In: ADVANCES IN APPLIED CERAMICS, vol. 112 n. 8, pp. 478-486. - ISSN 1743-6753 [Disponibilità ristretta]
Web of Science: 12 - Scopus: 12
[img]

Articolo di rivista Mr Abdul Karim; M Pavese; Ep Ambrosio; D Ugues; M Lombardi; S Biamino; C Badini; P Fino (2013)
Production and characterization of Ni and Cu composite coatings by electrodeposition reinforced with carbon nanotubes or graphite nanoplatelets. In: JOURNAL OF PHYSICS. CONFERENCE SERIES, vol. 439, 012019-. - ISSN 1742-6588
Web of Science: 0 - Scopus: 0

Articolo in atti di convegno Muhammad Ramzan Abdul Karim; Matteo Pavese; Daniele Ugues; Azhar Hussain; Andrea Giuseppe Pisa; Elisa Paola Ambrosio; Sara Biamino; Paolo Fino; Claudio Francesco Badini (2013)
Study of Micro hardness, Roughness, Wear and Corrosion Behaviour of Ni/CNT and Ni/GNP Composite Coatings Produced by Electrodeposition. In: 5th World Tribology Congress, Torino-Italy, 8-13 September, 2013.
Scopus: 0

Articolo di rivista W.S Yang; S. Biamino; E. Padovano; M. Pavese; S. Marchisio; G. D'Amico; S. Ceresa Mio; X. Chen; P. Fino; C. Badini (2013)
Thermophysical properties of SiC multilayer prepared by tape casting and pressureless sintering. In: COMPOSITE STRUCTURES, vol. 96, pp. 469-475. - ISSN 0263-8223
Web of Science: 5 - Scopus: 5

2012

Articolo in atti di convegno S. Marchisio; D. Manfredi; F.A. Deorsola; S. Biamino; P. Fino; M. Pavese (2012)
Carbon nanotubes-reinforced aluminium with improved yield strength and toughness. In: ECCM15, 15th european conference on composite materials, Venezia, Italy, 24-28 June 2012.
Scopus: 1

Articolo di rivista Badini C.; De Haan F. ; Celasco E.; Hähner P.; Vega Bolivar C.M.; Biamino S.; Pavese M.; Fino P. (2012)
Corrosion behaviour of SiC laminate under decomposed sulphuric acid at 850 °C. In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, vol. 95 n. 8, pp. 2627-2634. - ISSN 0002-7820
Web of Science: 4 - Scopus: 5

Articolo di rivista Ambrosio E.P.; Pavese M.; Biamino S.; Epicoco P.; Tulliani Jm.; Fossati P.; Marino F.; Fino P. (2012)
Cost effective glassy carbon brake pads solution for automotive systems. In: ADVANCES IN APPLIED CERAMICS, vol. 111 n. 7, pp. 427-432. - ISSN 1743-6753
Web of Science: 0 - Scopus: 0

Articolo in atti di convegno Marchisio S.; Troia A.; Musso S.; Cicero G.; Pugno N.; Pavese M. (2012)
Efficient dispersion of carbon nanotubes in polyvinylbutyral and mechanical performance of composites thereof. In: ECCM15, 15th european conference on composite materials, Venezia, Italia, 24-28 June 2012.
Scopus: 0

Articolo in atti di convegno S. Marchisio, A. Troia, G. Cicero, N. Pugno, M. Pavese (2012)
Efficient dispersion of carbon nanotubes in polyvinylbutyral and mechanical performance of composites thereof. In: FIRST INTERNATIONAL CONFERENCE ON MECHANICS OF NANO, MICRO AND MACRO COMPOSITE STRUCTURES, Torino, Italy, June 18-20, 2012.
Scopus: 0

Articolo di rivista M. Terner, S. Biamino, P. Epicoco, A. Penna, O. Hedin, S. Sabbadini, P. Fino, M. Pavese, U. Ackelid, P. Gennaro, F. Pelissero, C. Badini (2012)
Electron Beam Melting of high niobium containing TiAl alloy: feasibility investigation. In: STEEL RESEARCH INTERNATIONAL, vol. 83, pp. 943-949. - ISSN 1611-3683
Web of Science: 11 - Scopus: 17

Capitolo di libro M. Martena, P. Fino, S. Biamino, C. Badini, E. Campagnoli, M. Pavese (2012)
High temperature degradation of plasma sprayed thermal barrier coatings in oxidizing environment. In: Advances in Engineering Research. Volume 4 / Petrova V.M. Nova Science Publishers, Hauppauge .

Articolo di rivista Yang, Wenshu; Biamino, Sara; Padovano, Elisa; Fuso, Laura; Pavese, Matteo; Marchisio, Silvia; Vasquez Sandoval, Dreidy Mercedes; Vega Bolivar, Claudia Milena; Fino, Paolo; Badini, Claudio (2012)
Microstructure and mechanical properties of short carbon fibre/SiC multilayer composites prepared by tape casting. In: COMPOSITES SCIENCE AND TECHNOLOGY, vol. 72 n. 6, pp. 675-680. - ISSN 0266-3538 [Disponibilità ristretta]
Web of Science: 14 - Scopus: 15
[img]

Articolo in atti di convegno D. Manfredi; E.P. Ambrosio; F. Calignano; R. Canali; M. Krishnan; S. Biamino; M. Pavese; P. Fino (2012)
Realization and characterization of AlSiMg/SiC composites by direct metal laser sintering. In: ECCM15, 15th european conference on composite materials, Venezia, Italy, 24-28 June 2012.
Scopus: 1

Articolo di rivista C. Badini; V. Liedtke; G. Euchberger; E. Celasco; S. Biamino; S. Marchisio; M. Pavese; P. Fino (2012)
Self passivating behavior of multilayer SiC under simulated atmospheric re-entry conditions. In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, vol. 32, pp. 4435-4445. - ISSN 0955-2219 [Disponibilità ristretta]
Web of Science: 7 - Scopus: 7
[img]

2011

Articolo in atti di convegno S. Marchisio; D. Manfredi; E.P. Ambrosio; F.A. Deorsola; M. Pavese (2011)
Aluminium/CNTs Composites by PAFES. In: EURO PM 2011 International Powder Metallurgy Congress & Exhibition, Barcelona, Spain, 9-12 October 2011.
Scopus: 0

Articolo di rivista Biamino S.; Penna A. ; Ackelid U.; Sabbadini S.; Tassa O.; Fino P.; Pavese M.; Gennaro P.; Badini C. (2011)
Electron beam melting of Ti-48Al-2Cr-2Nb alloy: microstructure and mechanical properties investigation. In: INTERMETALLICS, vol. 19, pp. 776-781. - ISSN 0966-9795 [Disponibilità ristretta]
Web of Science: 75 - Scopus: 112
[img]

Articolo in atti di convegno S. Biamino, M. Terner, P. Epicoco, S. Sabbadini, P. Fino, M. Pavese, C. Badini (2011)
Electron beam melting of γ-TiAl alloys for aerospace applications. In: VIII Convegno nazionale sulla scienza e tecnologia dei materiali INSTM VIII.

Articolo di rivista Vega Bolivar C.; Biamino S.; Pavese M.; Fino P.; Hähner P.; Badini C. (2011)
Mechanical and corrosion performance of SiC multilayer containing porous layers. In: IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, vol. 18 n. Sympos, 202013-. - ISSN 1757-8981
Web of Science: 1 - Scopus: 2

Articolo in atti di convegno M. Pavese, D. Manfredi, S. Biamino, P. Fino, C. Badini (2011)
Metal- and intermetallic-ceramic co-continuous composites by reactive metal penetration. In: VIII Convegno nazionale sulla scienza e tecnologia dei materiali INSTM VIII.

Articolo in atti di convegno M. Pavese, D. Vasquez Sandoval, F.A. Deorsola, S. Biamino, P. Fino, C. Badini (2011)
Molybdenum/Niobium Disilicide Composites by Spark PlasmaSintering. In: EURO PM 2011 International Powder Metallurgy Congress & Exhibition, Barcelona, Spain, October 2011.

Articolo di rivista Yang W.S.; Badini C.; Fuso L.; Biamino S.; Pavese M.; Vega Bolivar C.; Fino P. (2011)
Preparation and prospective application of short carbon fiber/SiC multilayer composites by tape casting. In: WORLD JOURNAL OF ENGINEERING, vol. 8 n. 4, pp. 331-334. - ISSN 1708-5284

Capitolo di libro Badini C., Vega Bolivar C., Antonini A., Biamino S., Manfredi D., Ambrosio E.P., Acerra F., Campanile G., Fino P., Pavese M. (2011)
A Simple Approach to the Study of the Ageing Behaviour of Laser Beam and Friction Stir Welds between Similar and Dissimilar Alloys. In: Aluminium alloys : theory and applications / Kvackaj T., Bidulsky R. (ed.). InTech, Rijeka , pp. 71-92. ISBN 9789533072449

2010

Articolo di rivista Pavese M.; S. Musso; N.M. Pugno (2010)
Compression Behaviour of Thick Vertically Aligned Carbon Nanotube Blocks. In: JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, vol. 10, pp. 4240-4250. - ISSN 1533-4880
Web of Science: 6 - Scopus: 8

Altro Ambrosio E.P., Fino P., Pavese M., Biamino S., Epicoco P., Tulliani J.M., Fossati P., Marino F. (2010)
Cost effective intelligent hybrid solution for automotive brake systems. .

Articolo di rivista Navaneetha Pandiyaraj K.; Selvarajan V.; Rhee Y.H.; Kim H.W.; Pavese M. (2010)
Effect of dc glow discharge plasma treatment on PET/TiO2 thin film surfaces for enhancement of bioactivity. In: COLLOIDS AND SURFACES. B, BIOINTERFACES, vol. 79, pp. 53-60. - ISSN 0927-7765
Web of Science: 11 - Scopus: 13

Articolo in atti di convegno Biamino S.; Penna A.; Pavese M.; Marchisio S.; Ackelid U.; Fino P.; Sabbadini S.; Pelissero F.; Gennaro P.; Badini C. (2010)
Effect of powder features in the production of gamma-TiAl alloy components by electron beam melting. In: PM2010 powder metallurgy world congress & exhibition, Firenze (Italy), 10-14 October 2010. pp. 179-185
Scopus: 0

Altro Vega Bolivar C., Biamino S., Pavese M., Fino P., Hähner P., Badini C. (2010)
Mechanical and corrosion test on SiC multilayer contenenting porous layer. .

Altro Pavese M., Marchisio S., Manfredi D., Giorcelli M., Tagliaferro A., Pugno N. (2010)
Mechanical properties of polyvinyl butyral and epoxy resin/carbon nanotubes composites obtained by tape casting. .

Articolo in atti di convegno S. Marchisio; P. Miceli; M. Pavese; G. Ceraulo; T. Abdalrahman; D. Manfredi; M. Giorcelli; A. Tagliaferro; N. Pugno (2010)
Mechanical properties of polyvinyl butyral/carbon nanotubes composites obtained by tape casting. In: X INTERNATIONAL CONFERENCE ON NANOSTRUCTURED MATERIALS (NANO 2010), 13 - 17 September, Rome, Italy. POSTER PRESENTATION..

Articolo di rivista D. Manfredi; M. Pavese; Biamino S.; A. Antonini; P. Fino; C. Badini (2010)
Microstructure and mechanical properties of co-continuous metal/ceramic composites obtained from reactive metal penetration of commercial aluminium alloys into cordierite. In: COMPOSITES. PART A: APPLIED SCIENCE AND MANUFACTURING, vol. 41/5, pp. 639-645. - ISSN 1359-835X
Web of Science: 13 - Scopus: 18

Altro Vasquez Sandoval D., Deorsola F., Pavese M., Biamino S., Fino P., Badini C. (2010)
Molybdenum and Niobium silicide composites fabricated by Spark Plasma Sintering and Tape Casting. .

Articolo di rivista Biamino S.; A. Antonini; C. Eisenmenger-Sittner; L. Fuso; M. Pavese; P. Fino; E. Bauer; C. Badini (2010)
Multilayer SiC for thermal protection system of space vehicles with decreased thermal conductivity through the thickness. In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, vol. 30/8, pp. 1833-1840. - ISSN 0955-2219
Web of Science: 18 - Scopus: 17

Articolo in atti di convegno Biamino S., Manfredi D., Ambrosio E.P., Pavese M., Fino P., Badini C. (2010)
Multistrato in carburo di silicio prodotti mediante tape casting per applicazione come protezione termica di veicoli spaziali. In: 10° Convegno Nazionale AIMAT, Capo Vaticano (VV), Italy, 5-8 Settembre 2010.

Articolo di rivista Vega Bolivar C.; Antonini A.; Biamino S.; Pavese M.; Fino P.; Badini C. (2010)
Oxidation resistance of multilayer SiC for space vehicle thermal protection systems. In: ADVANCED ENGINEERING MATERIALS, vol. 12 n. 7, pp. 617-622. - ISSN 1438-1656
Web of Science: 10 - Scopus: 10

Altro Manfredi D., Ambrosio E.P., Pavese M., Biamino S., Deorsola F., Fino P. (2010)
Preparation and characterization of nanostructured Al/CNTs composites. .

Altro Manfredi D., Ambrosio E.P., Pavese M., Biamino S., Deorsola F., Fino P. (2010)
Preparation of vanadium dioxide ceramics by pressureless sintering and spark plasma sintering. .

Altro Biamino S., Manfredi D., Ambrosio E.P., Pavese M., Fino P., Badini C. (2010)
Tape casting and pressureless sintering of ZrB2-SiC composites. .

Articolo di rivista M. Castellino; M. Tortello; S. Bianco; Musso S.; M. Giorcelli; M. Pavese; R.S. Gonnelli; A. Tagliaferro (2010)
Thermal and electronic properties of macroscopic MWCNTs blocks. In: JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, vol. 10 n. 6, pp. 3828-3833. - ISSN 1533-4880
Web of Science: 10 - Scopus: 10

2009

Altro Biamino S., Pavese M., Fino P., Badini C. (2009)
Al2O3-ZrO2 nanocomposites produced by solution combustion synthesis followed by ultrasonic milling. .

Altro E.P. Ambrosio; Pavese M.; P. Fino; S. Biamino; S. Sabbadini; C. Badini (2009)
Chemical compatibility and feasibility study for electrochemically deposited nickel/silicon carbide composites. .

Articolo in atti di convegno Manfredi D.G.; Pavese M; Antonini A; Biamino S; Fino P; Badini C (2009)
Co-continuous metal/ceramic composites made by reactive metal penetration of commercial aluminium alloys into cordierite. In: 17th International Conference on Composite Materials-ICCM17, Edinburgh, UK, 27-31 July 2009.
Scopus: 0

Articolo in atti di convegno Biamino S.; Pavese M.; Ambrosio E.P.; Fino P.; Badini C. (2009)
Effect of ultrasonic irradiation on alumina-zirconia nanocomposites obtained by solution combustion synthesis. In: The 11th international conference and exhibition of the european ceramic society, Krakow (Poland), 21-25 June 2009. pp. 574-578
Scopus: 0

Articolo in atti di convegno Biamino S., Pavese M., Fino P., Badini C. (2009)
Effect of ultrasonic irradiation on alumina-zirconia-yttria nanocomposites obtained by solution combustion synthesis. In: The 11th international conference and exhibition of the european ceramic society, Krakow (Poland), 21-25 June 2009. pp. 139-140

Altro Musso S., Barus S., Zanetti M., Chiodoni A., Bianco S., Giorcelli M., Pavese M., Tagliaferro A. (2009)
Efficient CNT dispersion for polyethylene composite improvement. .

Articolo in atti di convegno Musso S.; S. Barus; M. Zanetti; A. Chiodoni; S. Bianco; M. Giorcelli; M. Pavese; A. Tagliaferro (2009)
Efficient CNT dispersion for polyethylene composite improvement. In: 1st international conference on Nanostructured Materials and nanocomposites (ICNM - 2009), Kottayam, Kerala, India, April 6- 8, 2009.

Altro Pavese M., Manfredi D., Biamino S., Fino P., Badini C. (2009)
Intermetallic/ceramic co-continuous composites obtained by double reactive metal penetration. .

Articolo di rivista K.N. Pandiyaraj; V. Selvarajan; Pavese M.; P. Falaras; D. Tsoukleris (2009)
Investigation on surface propertiesof TiO2 films modified by DC glow discharge plasma. In: CURRENT APPLIED PHYSICS, vol. 9, pp. 1032-1037. - ISSN 1567-1739
Web of Science: 9 - Scopus: 11

Articolo di rivista C. Badini; M. Pavese; P. Fino; Biamino S. (2009)
Laser beam welding of dissimilar aluminium alloys of 2000 and 7000 series: effect of post-welding thermal treatments on the T-joint strength. In: SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, vol. 14, pp. 484-492. - ISSN 1362-1718
Web of Science: 9 - Scopus: 14

Articolo di rivista Pavese M; Biamino S. (2009)
Mesoporous alumina obtained by Combustion Synthesis without template. In: JOURNAL OF POROUS MATERIALS, vol. 16, pp. 59-64. - ISSN 1380-2224
Web of Science: 16 - Scopus: 16

Altro D. Vasquez Sandoval; S. Biamino; Pavese M.; P. Fino; C. Badini (2009)
MoSi2-NbSi2 composites obtained by tape casting: mechanical properties and oxidation behaviour. .

Altro Vega Bolivar C.M., Biamino S., Pavese M., Fino P., Badini C. (2009)
Multilayer SiC for thermal protection system of space vehicles. .

Articolo in atti di convegno Antonini A.; Biamino S; Pavese M; Fino P; Badini C (2009)
Multilayer SiC-MoSi2 Composites Produced by Tape Casting. In: 17th International Conference on Composite Materials, Edinburgh (UK), 27-31 July 2009.
Scopus: 0

Articolo in atti di convegno Fino P.; Manfredi D.; Pavese M.; Biamino S.; Badini C. (2009)
NiAl/Al2O3 co-continuous composites obtained by double reactive metal penetration. In: The 11th international conference and exhibition of the european ceramic society, Krakow (Poland), 21-25 June 2009. p. 134
Scopus: 0

Articolo in atti di convegno Manfredi D.; Ambrosio E.P.; Pavese M.; Biamino S.; Fino P.; Badini C. (2009)
NiAl/Al2O3 co-continuous composites obtained by double reactive metal penetration. In: VII convegno nazionale sulla scienza e tecnologia dei materiali, Green Park Resort - Tirrenia, 9-12 Giugno 2009. P081-P081
Scopus: 0

Articolo in atti di convegno Fino P.; Manfredi D.; Pavese M.; Biamino S.; Badini C. (2009)
NiAl/Al2O3 co-continuous composites obtained by double reactive metal penetration. In: The 11th international conference and exhibition of the european ceramic society, Krakow (Poland), 21-25 June 2009. pp. 549-552
Scopus: 0

Articolo di rivista Manfredi D; Pavese M; Biamino S; Fino P.; Badini C (2009)
Preparation and properties of NiAl-Al2O3 co-continuous composites obtained by reactive metal penetration. In: COMPOSITES SCIENCE AND TECHNOLOGY, vol. 69, pp. 1777-1782. - ISSN 0266-3538
Web of Science: 7 - Scopus: 11

Articolo di rivista L. Fuso; D. Manfredi; S. Biamino; Pavese M.; P. Fino; C. Badini (2009)
SiC-based multilayered composites containing short carbon fibres obtained by tape casting. In: COMPOSITES SCIENCE AND TECHNOLOGY, vol. 69, pp. 1772-1776. - ISSN 0266-3538
Web of Science: 12 - Scopus: 12

Articolo di rivista Troia A.; Pavese M.; Geobaldo F. (2009)
Sonochemical Preparation Of High Surface Area MgAl2O4 Spinel. In: ULTRASONICS SONOCHEMISTRY, vol. 16, pp. 136-140. - ISSN 1350-4177 [Disponibilità ristretta]
Web of Science: 27 - Scopus: 28
[img]

Articolo in atti di convegno Biamino S., Pavese M., Fino P., Badini C. (2009)
Tape Casting of Silicon Carbide Multilayers: Rheological Behaviour. In: VII convegno nazionale sulla scienza e tecnologia dei materiali, Green Park Resort - Tirrenia, 9-12 Giugno 2009. P020-P020

Articolo in atti di convegno Vasquez Sandoval D.; Vega Bolivar C.; Antonini A.; Biamino S.; Pavese M.; Fino P.; Badini C. (2009)
Tape casting of multilayered molybdenum and niobium silicide composites. In: The 11th international conference and exhibition of the european ceramic society, Krakow (Poland), 21-25 June 2009. pp. 519-523
Scopus: 1

Articolo in atti di convegno Vasquez Sandoval D., Vega Bolivar C., Antonini A., Biamino S., Pavese M., Fino P., Badini C. (2009)
Tape casting of multilayered molybdenum and niobiun silicide composite. In: The 11th international conference and exhibition of the european ceramic society, Krakow (Poland), 21-25 June 2009. p. 128

2008

Articolo di rivista Pavese M.; P. Fino; C. Badini; A. Ortona; G. Marino (2008)
HfB2/SiC as a protective coating for 2D Cf/SiC composites: Effect of high temperature oxidation on mechanical properties. In: SURFACE & COATINGS TECHNOLOGY, vol. 202, pp. 2059-2067. - ISSN 0257-8972
Web of Science: 28 - Scopus: 46

Articolo di rivista S. Musso; M. Giorcelli; M. Pavese; S. Bianco; M. Rovere; Tagliaferro A. (2008)
Improving macroscopic physical and mechanical properties of thick layers of aligned multiwall carbon nanotubes by annealing treatment. In: DIAMOND AND RELATED MATERIALS, vol. 17, pp. 542-547. - ISSN 0925-9635 [Disponibilità ristretta]
Web of Science: 35 - Scopus: 35
[img]

Articolo in atti di convegno Antonini A., Biamino S., Pavese M., Badini C., Fino P. (2008)
Materiali compositi SiC-MoSi2 con architettura laminare multistrato. In: 9° Convegno Nazionale AIMAT, Associazione italiana d'Ingegneria dei MATeriali, Piano di Sorrento (Na) (Italy), 29 Giugno-2 Luglio 2008. pp. 25-28

Articolo in atti di convegno Pavese M., Manfredi D., Biamino S., Fino P., Badini C. (2008)
Microstruttura e proprietà di compositi co-continui intermetallico-ceramico ottenuti per infiltrazione reattiva. In: 32° Convegno Nazionale AIM, Ferrara (Italy), 24-26 settembre 2008.

Articolo di rivista Sara Biamino; Andrea Antonini; Pavese M.; Paolo Fino; Claudio Badini (2008)
MoSi2 laminate processed by tape casting: microstructure and mechanical properties investigation. In: INTERMETALLICS, vol. 16, pp. 758-768. - ISSN 0966-9795
Web of Science: 12 - Scopus: 16

Articolo di rivista Biamino S; Liedtke V; Badini C; Euchberger G; Huertas Olivares I; Pavese M; Fino P. (2008)
Multilayer SiC for thermal protection system of space vehicles: Manufacturing and testing under simulated re-entry conditions. In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, vol. 28 n. 12, pp. 2791-2800. - ISSN 0955-2219
Web of Science: 25 - Scopus: 24

Articolo di rivista Diego Manfredi; Pavese M.; Sara Biamino; Paolo Fino; Claudio Badini (2008)
NiAl(Si)/Al2O3 co-continuous composites by double reactive metal penetration into silica preforms. In: INTERMETALLICS, vol. 16, pp. 580-583. - ISSN 0966-9795
Web of Science: 7 - Scopus: 13

Articolo in atti di convegno Pavese M., Vega Bolivar C., Biamino S., Fino P., Badini C. (2008)
Oxidation behaviour of SiC-based multilayer integrating porous layers. In: The 1st International Conference on New Materials for Extreme Environments, San Sebastian (Spain), 2-4 June 2008.

Articolo di rivista Pavese M.; Fino P; Ortona A; Badini C (2008)
Potential of SiC multilayer ceramics for high temperature applications in oxidising environment. In: CERAMICS INTERNATIONAL, vol. 34, pp. 197-203. - ISSN 0272-8842 [Disponibilità ristretta]
Web of Science: 31 - Scopus: 30
[img]

Articolo in atti di convegno Biamino S., Antonini A., Schwarz B., Pavese M., Fino P., Badini C. (2008)
SiC-based multilayer containing porous layers: thermomechanical characterization. In: The 1st International Conference on New Materials for Extreme Environments, San Sebastian (Spain), 2-4 June 2008.

Altro Castellino M., Pavese M., Bianco S., Musso S., Giorcelli M., Tagliaferro A. (2008)
Thermal properties of MWCNTs and SWCNTs. .

Altro Musso S., Bianco S., Pavese M., Giorcelli M., Castellino M., Campagnoli E., Ruscica G., Tagliaferro A. (2008)
Thermal properties of bulk nanotubes systems. .

Articolo di rivista Pavese M.; S. Musso; S. Bianco; M. Giorcelli; N. Pugno (2008)
An analysis of carbon nanotube structure wettability before and after oxidation treatment. In: JOURNAL OF PHYSICS. CONDENSED MATTER, vol. 20 n. 47, pp. 474206-474212. - ISSN 0953-8984
Web of Science: 17 - Scopus: 26

Articolo in atti di convegno S. Musso, M. Pavese, S. Bianco, M. Giorcelli, N. Pugno, A. Tagliaferro (2008)
An analysis of carbon nanotubes wettability before and after oxidation treatments. In: x.
Web of Science: 17 - Scopus: 26

Altro Musso S., Pavese M., Bianco S., Giorcelli M., Pugno N., Tagliaferro A. (2008)
An analysis of carbon nanotubes wettability before and after oxidation treatments. .

2007

Articolo di rivista Pavese M.; Valle M; Badini C (2007)
Effect of porosity of cordierite preforms on microstructure and mechanical strength of C4 composites. In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, vol. 27, pp. 131-141. - ISSN 0955-2219
Web of Science: 19 - Scopus: 30

Articolo in atti di convegno S. Musso; M. Giorcelli; Pavese M.; S. Bianco; M. Rovere; A. Tagliaferro (2007)
Improving macroscopical physical and mechanical properties of thick layers of aligned multiwall carbon nanotubes by annealing. In: The First International Conference on New Diamond and Nano Carbons (NDNC2007), Osaka, Japan, May 28-31, 2007.

Articolo in atti di convegno Musso S.; M. Giorcelli; M. Pavese; A. Tagliaferro (2007)
Improving macroscopical physical and mechanical properties of thick layers of aligned multiwall carbon nanotubes by annealing. In: XXIst International Winterschool, IWEPNM2007, Tirol, Austria, 10-17 March 2007.

Articolo in atti di convegno M. Pavese; S. Musso; M. Giorcelli; S. Bianco; Pugno N. (2007)
Physical and mechanical behaviour of thick layers of aligned multiwall carbon nanotubes. In: Int. Workshop "NANOSCIENCE & NANOTECHNOLOGY". (National Institute of Nuclear Physics), October 15-16, 2007, Frascati (Laboratories), Italy.

Altro D. Manfredi, M. Pavese, S. Biamino, P. Fino, C. Badini (2007)
Preparation and properties of NiAl-Al2O3 co-continuous composites obtained by reactive metal penetration. .

Altro S. Biamino, C. Badini, L. Camedda, P. Fino, M. Pavese (2007)
Processing of SiC multilayer by tape casting and sintering. .

Altro S. Biamino, L. Camedda, M. Pavese, P. Fino, C. Badini (2007)
SiC multilayer by tape casting and sintering for thermal protection. .

Altro L. Fuso, D. Manfredi, S. Biamino, M. Pavese, P. Fino, C. Badini (2007)
SiC-based multilayered composites containing short carbon fibers obtained by tape casting. .

2006

Articolo di rivista Biamino S; Fino P; Pavese M.; Badini C (2006)
Alumina-zirconia-yttria nanocomposites prepared by solution combustion synthesis. In: CERAMICS INTERNATIONAL, vol. 32, pp. 509-513. - ISSN 0272-8842 [Disponibilità ristretta]
Web of Science: 45 - Scopus: 47
[img]

Articolo di rivista Pavese M.; Fino P; Ugues D; Badini C (2006)
High cycle fatigue study of metal-ceramic co-continuous composites. In: SCRIPTA MATERIALIA, vol. 55, pp. 1135-1138. - ISSN 1359-6462 [Disponibilità ristretta]
Web of Science: 11 - Scopus: 16
[img]

Articolo di rivista Pavese M.; Fino P; Valle M; Badini C (2006)
Preparation of C4 ceramic/metal composites by reactive metal penetration of commercial ceramics. In: COMPOSITES SCIENCE AND TECHNOLOGY, vol. 66, pp. 350-356. - ISSN 0266-3538 [Disponibilità ristretta]
Web of Science: 10 - Scopus: 13
[img]

Articolo in atti di convegno Campagnoli E.; Firrao D; Matteis P; Mortarino G.M.M; Pavese M; Ruscica G; Gerosa R; Rivolta B; Silva G (2006)
Proprietà termofisiche di un acciaio per stampi per materie plastiche, in funzione della temperatura e delle fasi. In: 31° Convegno Nazionale AIM, Milano, 22-24 Novembre 2006. pp. 1-15

2005

Articolo in atti di convegno Camedda L; Biamino S.; Pavese M; Fino P; Badini C (2005)
Degradation and microscopic observation of different ceramic powders for TBCs under Na2SO4 and NaCl. In: The European Corrosion Congress - EUROCORR 2005, Lisbon, Portugal, 4-8/09/2005. 432-

Articolo in atti di convegno Fuso L; Biamino S.; Pavese M; Fino P; Geobaldo F; Badini C (2005)
Deposition of mesoporous alumina with narrow pore distribution by in situ Combustion Synthesis without template. In: The 6th International Workshop on Catalytic Combustion - IWCC6, Ischia Porto (Na), Italy, 11-14/09/2005. pp. 45-49

Articolo in atti di convegno Fino P; Pavese M.; Scatteia L; Marino G; Ortona A; Badini C (2005)
High temperature oxidation of a 2D SiC/Cf coated with SiC deposited by CVD: effect on mechanical properties. In: Euromat 2005, Praha, Czech Republic, September 4 – 8, 2005.

Articolo in atti di convegno Pavese M.; Fino P; Ortona A; Badini C (2005)
Potential of SiC multilayer ceramics for high temperature applications in oxidising environment. In: Euromat 2005, Praha, Czech Republic, September 4 – 8, 2005.

Brevetto Badini C; Fino P; Pavese M.; Biamino S; Saracco G (2005)
Procedimento di sintesi "in situ" di ossidi micro e nanostrutturati su di un supporto poroso. TO2005A000080.

2003

Articolo in atti di convegno M. Pavese; A. Civera; Galletti C.; S. Biamino; G. Saracco; V. Specchia (2003)
Combustion shyntesis of mesoporous alumina as catalyst support. In: EUROPACAT VI, innsbruck, 31 agosto-4 settembre 2003.

Articolo in atti di convegno Civera A; Pavese M; Saracco G.; Specchia V (2003)
Combustion synthesis of LaMnO3/ZrO2 based catalysts for methane oxidation. In: Fourth European Congress of Chemical Engineering ECCE-4, Granada, Spain, 21-25. P-5.2-022-

Articolo di rivista Civera A; Pavese M; Saracco G.; Specchia V (2003)
Combustion synthesis of perovskite-type catalysts for natural gas combustion. In: CATALYSIS TODAY, vol. 83, pp. 199-211. - ISSN 0920-5861
Web of Science: 170 - Scopus: 193

Articolo di rivista Cerri I; Pavese M.; Saracco G; Specchia V (2003)
Premixed metal fibre burners based on a Pd catalyst. In: CATALYSIS TODAY, vol. 83, pp. 19-31. - ISSN 0920-5861
Web of Science: 23 - Scopus: 24

Articolo in atti di convegno Pavese M.; Fino P; Valle M; Badini C (2003)
Preparation of C4 ceramic/metal composites by reactive metal penetration of commercial ceramics. In: ETDCM6, Sixth International Seminar on Experimental techniques and design in composite materials, Vicenza, Italy, 18 – 20th June 2003.

2002

Articolo in atti di convegno Civera A; Pavese M; Saracco G.; Specchia V (2002)
Combustion Synthesis of perovskite-type catalysts for natural gas combustion. In: 5th Int. Workshop on Catalytic Combustion, COEX, Seoul, April 29 - May 1,2002. pp. 51-52

Articolo in atti di convegno Pavese M.; Puppo D; Badini C (2002)
Compositi metallo-ceramici co-continui ottenuti per infiltrazione reattiva di preforme ceramiche. In: 6. Congresso AIMAT, Modena (ITA), 8-11 Set. 2002 .

Articolo di rivista Cerri I; Pavese M; Saracco G.; Specchia V (2002)
Pre-mixed metal fibre burners based on palladium catalysts. In: CATALYSIS TODAY. - ISSN 0920-5861

Articolo di rivista Badini C; Puppo D; Pavese M. (2002)
Processing of co-continuous ceramic composites by reactive penetration method: influence of composition of ceramic preforms and infiltrating alloys. In: INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, vol. 17, pp. 182-204. - ISSN 0268-1900
Web of Science: 9 - Scopus: 11

Articolo in atti di convegno Pavese M.; Bizzi M; Garrone E; Saracco G (2002)
A transient-TGA study on perovskite materials for oxygen-conducting ceramic membranes. In: CIMTEC 2002, Firenze, Italy, July 14-18, 2002. pp. 15-22

Questa lista è stata generata il Fri Dec 15 07:34:07 2017 CET.